Print

Agri-Sprayer: 3-point mounted 600 lt Boom Sprayer

Agri-SprayerSPECIFICATIONS

  • Heavy gauge fibreglass tank with 600lt capacity.
  • Self-draining tank.
  • Sturdy Galvanised frame and folding spray boom.
  • Zeta 85 pump delivering 85lt/min plus PTO shaft.
  • Stainless steel or nylon fittings throughout.
  • Fittings for additional lances.
  • Knapsack filler.
  • Bracket for attachment of full cover spray boom and wind box.
  • Low pressure and high-pressure filters.
  • Adjustable drop arms fixed on boom with crocodile
    clamps with swing-back action.
  • Quick-Jet nozzle holders with diaphragm check valves.
  • Main control valve and pressure gauge mounted on extended arm.
  • 6-bar pressure gauge.
  • Boom length to allow for a maximum of 4 x 1.5 metre rows.
  • Boom construction allows for nozzle in centre below PTO shaft.
  • 6-point manifold with additional valve and pipe for filling knapsacks.
  • Stainless steel agitation line, removable from the side of the tank.
  • Screw top lid with inspection hatch + basket filter.Agri-Sprayer
  • Fluid measuring windows front and rear.
  • Stainless steel distribution chamber and flow control valve.
  • Forward mounted spray boom.
  • Raised pump mount.
  • Other options include an additional drop arm for 5 rows and rear-mounted boom and extension pieces for booms.


  FEATURES & BENEFITS

  • The Agri-Sprayer has been developed specifically for sugar cane growers using more than 30 years of hands-on experience to overcome many of the problems encountered by growers.
  • Simple calibration system
  • Low-pressure inlet and high-pressure outlet filters
    mounted at rear for ease of access for cleaning.Agri-Sprayer
  • Adjustable drop arms fixed on boom with crocodile clamps to allow swing back action if knocked by obstacle.
  • Quick-Jet nozzle holders with diaphragm check valve to stop dripping nozzles when main control valve is shut off.
  • Main control valve and pressure gauge mounted on extended arm for ease of use by operator.
  • 6 Bar pressure gauge to allow for more accurate calibration in the 1 to 3 bar range.
  • Boom length allows for maximum of 4 x 1.5 metre rows.
  • Boom construction allows for nozzle in centre below PTO shaft.
  • 6-point stainless steel manifold with additional valve and pipe for filling of knapsacks.
  • Stainless steel agitation line, which can be removed from side of tank for maintenance and cleaning.
  • Screw top lid with inspection hatch + basket filter.
  • Fluid measuring windows front and rear which can also be used for levelling the tank.
  • Stainless steel distribution chamber and flow control valve for quick change of calibration for different spraying operations.
  • Forward mounted spray boom for improved spray height control and driver visibility.
  • Zeta 85 pump delivering 85 lt/min. for nozzle output and agitation. 
  • Sturdy galvanised frame to withstand the rigours of handling and weathering.
  • Raised pump mount which keeps pump clear of obstacles when lowered.


OTHER OPTIONS

  • Rear mounted 6,200m boom for full cover spray - 13 nozzles at 500mm spacing.
  • Rear-mounted 9.200m boom for full cover spray - 19 nozzles at 500mm spacing.
  • Rear mounted windbox for chemical mowing - refer Agri-Mowbox